[CinCV] Cinelerra render crash

[Kevin Moloney]

Hello friends,

I just recently installed Cinelerra on XUbuntu 10.10 on a Macbook Pro
6,2. I compiled from the git source yesterday.

All seems to be working fine until I render a simple test project. At
the 100% point Cinelerra crashes, leaving an incomplete output file
(AVI, rendering both video and audio at 1280X720). Most of the time
the resulting file has audio but no video.

Here is the terminal output:

Cinelerra is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. There is absolutely no warranty for Cinelerra.
Render::run 1
Render::run 2
Render::run 3
Render::run 4
Render::run 5
Render::run 6
Render::run 7
Render::run 8
Render::run 8.1
Render::run 8.2
Render::run 8.3
Render::run 9
Render::run 10
signal_entry: got SIGSEGV my pid=2195 execution table size=16:
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
signal_entry: lock table size=13
0x1f1c0e0 CWindowTool::input_lock CWindowTool::run
0xf27e10 BC_Synchronous::next_command BC_Synchronous::run
0x200cc30 TransportQue::output_lock PlaybackEngine::run
0x200d630 MainIndexes::input_lock MainIndexes::run 1
0x1f41600 TransportQue::output_lock PlaybackEngine::run
0x2093470 ResourceThread::draw_lock ResourceThread::run
0x20cc2c0 BC_Repeater::pause_lock BC_Repeater::run
0x1f43040 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1f71430 BC_WindowBase::event_condition BC_WindowBase::get_event
0x20cdc40 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1d27670 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1e6bc10 BC_WindowBase::event_condition BC_WindowBase::get_event
0x200f880 BC_WindowBase::event_condition BC_WindowBase::get_event
BC_Signals::dump_buffers: buffer table size=0
BC_Signals::delete_temps: deleting 0 temp files
SigHandler::signal_handler total files=0
Aborted
--
--
"Photography has flourished for a century and a half with only two
real subjects: beauty and bad news." -- Larry McMurtry

Kevin Moloney Photography
303/604-9860
http://www.KevinMoloney.com

PrefesserKev
http://blog.KevinMoloney.com
http://twitter.com/PerfesserKev

[Kevin Moloney]

Hello friends,

I just recently installed Cinelerra on XUbuntu 10.10 on a Macbook Pro
6,2. I compiled from the git source yesterday.

All seems to be working fine until I render a simple test project. At
the 100% point Cinelerra crashes, leaving an incomplete output file
(AVI, rendering both video and audio at 1280X720). Most of the time the
resulting file has audio but no video.

Here is the terminal output:

Cinelerra is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. There is absolutely no warranty for Cinelerra.
Render::run 1
Render::run 2
Render::run 3
Render::run 4
Render::run 5
Render::run 6
Render::run 7
Render::run 8
Render::run 8.1
Render::run 8.2
Render::run 8.3
Render::run 9
Render::run 10
signal_entry: got SIGSEGV my pid=2195 execution table size=16:
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
vrender.C: process_buffer: 124
vrender.C: process_buffer: 134
signal_entry: lock table size=13
0x1f1c0e0 CWindowTool::input_lock CWindowTool::run
0xf27e10 BC_Synchronous::next_command BC_Synchronous::run
0x200cc30 TransportQue::output_lock PlaybackEngine::run
0x200d630 MainIndexes::input_lock MainIndexes::run 1
0x1f41600 TransportQue::output_lock PlaybackEngine::run
0x2093470 ResourceThread::draw_lock ResourceThread::run
0x20cc2c0 BC_Repeater::pause_lock BC_Repeater::run
0x1f43040 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1f71430 BC_WindowBase::event_condition BC_WindowBase::get_event
0x20cdc40 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1d27670 BC_WindowBase::event_condition BC_WindowBase::get_event
0x1e6bc10 BC_WindowBase::event_condition BC_WindowBase::get_event
0x200f880 BC_WindowBase::event_condition BC_WindowBase::get_event
BC_Signals::dump_buffers: buffer table size=0
BC_Signals::delete_temps: deleting 0 temp files
SigHandler::signal_handler total files=0
Aborted
--
--
"Photography has flourished for a century and a half with only two real subjects: beauty and bad news." -- Larry McMurtry

Kevin Moloney Photography
303/604-9860
http://www.KevinMoloney.com

PrefesserKev
http://blog.KevinMoloney.com
http://twitter.com/PerfesserKev

[Asmo Koskinen]

Post by Kevin Moloney
I just recently installed Cinelerra on XUbuntu 10.10 on a Macbook Pro
6,2. I compiled from the git source yesterday.

Almost same here. Ubuntu x86_64 10.10 (Intel/NVidia-based).

Post by Kevin Moloney
All seems to be working fine until I render a simple test project. At
the 100% point Cinelerra crashes, leaving an incomplete output file
(AVI, rendering both video and audio at 1280X720). Most of the time the
resulting file has audio but no video.

Yes. I can confirm that crashing. Ogg/Theora works, btw.

Best Regards Asmo Koskinen.